Close × Productpage Brochure Specifications Video Auto-Cutter Registration

LX900e Color Label Printer Specifications

Print Method: Thermal inkjet with Primera Imaging Perfection enhancements
Print Resolutions: Up to 4800 dpi
Print Speeds: Draft Mode: 114 mm (4.5”) per second
Normal Mode: 45.7 mm (1.8”) per second
High Quality Mode: 20.3 mm (0.8”) per second
Print Head: Semi-permanent, user-replaceable
Inks: Individual ink cartridges for Cyan, Magenta, Yellow and Black (pigment ink or dye ink option)
Colors: 16.7 million
Color Matching: Z-Color™ Color Matching Software
Print Width: 13 mm (0.75") to 210 mm (8.25")
Media Width: 38 mm (1.5") to 212 mm (8.375")
Media Types: Roll-fed pressure-sensitive labels or roll-fed tag
Media Sensing: Moveable see-through sensor for die-cut labels;
reflective sensor for labels and tags with black stripe;
can use continuous and pre-printed labels and tags
Supply Roll: 152 mm (6") maximum diameter on 76 mm (3") core.
Ink Level Warning: Calculates actual number of prints remaining based upon ink usage of graphics being printed (patent-pending)
Indicator Lights: Power, Pause, Ink
Controls: Pause, Feed, Unload
Operating Systems: Windows® 7/10 (32-bit or 64-bit)
Mac OS v10.6 or higher
Data Interface: USB 2.0; External Control Port
Label Design Software: NiceLabel® SE Primera Edition included. Can also be used with most other popular label design and graphics software programs
Electrical Rating: 12VDC, 5.0A
Power Requirements: 100-240VAC, 50/60 Hz, 60 watts
Certifications: UL, UL-C, CE, FCC Class B
Weight: 16.6 kg (36.5 lbs.)
Dimensions: 438 mm W x 231 mm H x 438 mm D (17.25"W x 9.1"H x 17.25"D)

Label Specifications

Max Min
Label width: 209.6mm (8.25") 12.7mm (0.5")
Liner/media width: 212.7mm ( 8.375") 38.1mm (1.5")
Label height/length: 431.8mm (17") 12.7mm (0.5")
Gap between labels: 254mm (10") 2.5mm (0.10")
Width of thru-hole opening: 12.7mm ( 0.5") 6.325mm (0.25")
Distance from edge of media to edge of thru-hole: 57mm (2.25") 5.06mm ( 0.20")
Reflective/Black Mark Width*: N/A 2.54mm (0.1")
Max Outer Diameter (OD): 152.4mm (6.0") N/A
Inner Core Diameter (ID): 76.2mm (3.0") 76.2mm (3")
Total Thickness (Liner + Label)**: 10 mil (0.010”) N/A
Distance from edge of media to edge of label: Printer driver assumes 2 mm gap. However, this is adjustable via the left margin offset.

More information can be located in the LX900e User's Manual

* The Reflective/Black Mark should be opaque to infrared light. The mark should be between the labels. The end of the mark should correspond with the beginning of the label.
** This is the recommended maximum. There are two factors that determine whether the printer will accept any particular stock thickness.

Copyright © 2019 DTM Print GmbH