2E Aligning the Ink Cartridges
Cartridge alignment will align the Colour Cartridge for bidirectional printing and calibrate the printer to each individual cartridge. You will automatically be prompted to perform this alignment each time you install a new cartridge. You may also manually align the cartridge via the status monitor.
For Alignment you will need to have installed label stock that is equal to or larger than 4” x 2” (101.6 mm x 50.8 mm). If your stock does not meet this requirement you can use the sample roll that came with the printer for this purpose. You may also choose to disable alignment via the settings area of the status monitor.
Disable Alignment: If you would like to enable smooth transitions between ink cartridge changes, you may choose to disable alignment print warnings. Alignment improves print quality if Bidirectional printing is enabled. It is not necessary if Bidirectional printing is disabled via the printer driver.
You can disable alignment via the status monitor.2 E Installing The Label Supply Hub
- Open the status monitor.
- Select the settings tab (fifth tab).
- Uncheck “Require cartridge alignment for best quality.”
