3A Calibrating the Carousel Platter / Demo Mode

If print item lifting and placement is out of alignment you can do a calibration manually.

Platter Calibration

Hold for 3 seconds

Press and hold the Load/Unload button and the Pause button simultaneously for 3 seconds. The Carousel Platter will make a 1 and ¼ revolution. The calibration is now complete.

To check for proper calibration, you can press the Load/Unload button to attempt to lift the next cookie. The cookie platform should rise exactly between the access slot on the carousel platter.

To place the Printer in demo mode, press momentarily press both the Load/Unload and Pause buttons simultaneously.

Demo Mode

Momentarily

Demo mode will lift cookies, retract them for printing and go through the motions of printing (but not print on them), and then immediately replace them on the platter continuously until you press the pause button.