Specifications CX86e colour tag printer

Print Method:	Full-colour electrophotographic with three separate LED print engines (CMY)
Toner Cartridge:	CMY three-colour toner cartridge
Print Resolution:	600 x 600 dpi native; up to 1200 x 1200 dpi
Max. Print Speed:	15.24 cm (6") per second; Idle mode to first label presented: 4 seconds
Media Width:	25 - 86 mm
Media Length:	53 - 551 mm
Cutter:	Built-in rotary cutter (cuttable media length 53 mm to 551 mm)
Media Feed:	External material feed via roll, continuous paper in zigzag folding or single sheet Sheet Feed: Paper cut into rectangles in the range of 25 mm to 86 mm width and 53 mm to 551 mm length
Media Types:	Self-adhesive label or tags, dry toner approved films (Use DTM Print certified Genuine Label Stock for a variety of approved dry toner materials)
Media Sensing:	Moveable transmission sensor for die-cut and through hole labels; Moveable reflective sensor for labels and tags with black stripe; can also use continuous and pre-printed labels and tags
Supply Roll:	254 mm (10”) maximum outer diameter on virtually any roll core bigger than 25.4 mm (1”)
Cut Type Sensing:	black mark (up/down) center holes side holes notch GAP defined length on continuous roll
Display:	Mono-LCD, 16 characters x 2 lines
Memory:	512 MB
Data Interfaces:	USB 2.0, Ethernet (100BASE-T/-T/10BASE-T), WLAN (optional), GPIO control port
Design Software:	NiceLabel Free (DTM Edition) included. Upgrade for data import and Variable Data Printing. Can also be used with most other popular label design and graphics software programs
Printer Language:	PCL6(PCL XL), PCL5c
Command base embedded Barcode:	PCL5c: 1D Barcode: 10 types, UPC-A, UPC-E, EAN/JAN-8, EAN/JAN-13, Interleaved 2of5, Code39, Code128, EAN/UCC-128, CODABAR, ZIP+4 POSTNET 2D Barcode: 2 types: PDF417, QR code (Model2 only) PCL6: N/A (Host based image data only)
Windows Driver (PCL6):	Windows 7, 8, 8.1, 10 Windows Server 2008, 2008 R2, 2012, 2012 R2, 2016
Power Requirements:	220 to 240 V AC, 50/60 Hz 110 V upon request
Certifications:	CE, GS, WEEE, RoHS2, REACH, BIS
Weight:	Approx. 9.5 kg
Dimensions (WxHxD):	198 x 195 x 380 mm (7.8” x 7.7” x 15”)
Warranty:	36 months (after product registration for devices, purchased in EU, EFTA countries and UK)
Manufacturer:	DTM Print GmbH

Label and Media Specifications

Label width:	Pre die-cut: 20.8 mm (0.819") to 81.8 mm (3.22")
Liner/media width:	25 mm (0.984") to 86 mm (3.386")
Label hight/length:	Pre die-cut: 48.8 mm (1.921") to 545.8 mm (21.488")
Minimum Print Margin:	Continuous paper/cut sheet: 2 mm (0.079") to 4.2 mm (0.165") side/top and 2 mm (0.079") to 6.3 mm (0.248") bottom Pre die-cut: 2.1 mm (0.0826") side/top/bottom
Media Thickness (Liner + Label)*:	Continuous paper: 80 µm (0.08 mm) to 250 µm (0.25 mm) / 3 mil (0.003") to 9.8 mil (0.0098") Cut sheet: 60 µm (0.06 mm) to 250 µm (0.25 mm) / 2 mil (0.002") to 9.8 mil (0.0098")
Gap between labels:	3 mm (0.118") to 15 mm (0.59")
Width of through-hole:	7 mm (0.276") or more
Reflective/Black Mark Width**:	Min: 9 mm (0.354") Max: N/A
Reflective/Black Mark Length**:	2.5 mm (0.1") to 13 mm (0.5")
Gap Sensor Adjustment Range:	From the middle: 30.8 mm (1.21") to the left and 42.2 mm (1.66") to the right
Max Outer Diameter (OD):	273 mm (10.75")
Inner Core Diameter (ID):	Works with virtually any roll core bigger than 25.4 mm (1″)

* This is the recommended maximum. There are two factors that determine whether the printer will accept any particular stock thickness.

The ability for the printer to pull the paper through the printer area.
The ability for the sensor to read through the backing if the sensor is set to die-cut.

** The Reflective/Black Mark should be opaque to infrared light. The mark should be between the labels. The end of the mark should correspond with the beginning of the label.

Further information is available in the user manual.