AP360e Label Applicator - Technical Specifications
| Number of Labels Dispensed per Trigger | 1 |
| Speed | 101 mm/s (4"/s) or up to 1,200 containers per hour |
| Container Shape | Cylidical and many tapered |
| Container Diameter | 15 mm - 170 mm (0.6" - 6.7") |
| Container Width | 25.4 mm - 238 mm (1" - 9.4") |
| Container Height | 15 mm - 170 mm (0.6" - 6.7") |
| Label Width | 19 mm - 209 mm (0.75" - 8.25") |
| Label Height | 19 mm - 609.6 mm (0.75" - 24") |
| Supply Roll | Up to 203 mm (8") OD with a 50.8 mm to 76.2 mm (2" to 3") ID wound out, die-cut |
| Label Liner Rewinder | No |
| Label Sensor Type | Mechanical sensor |
| Controls | Footswitch |
| Power Requirements | 100 V - 240 V AC (50/60 Hz), 12 V DC, 5.0 A |
| Power Consumption |
Idle: 1.6 W Average: 20 W |
| Certifications | UL, UL-C, CE, FCC Class A, RoHS, UKCA |
| Weight | 7.26 kg |
| Dimensions (W × H × D) | 340 mm × 226 mm × 328 mm |
| Gap between Labels | Recommended: 3 mm - 6 mm |
| Label Type | Die cut with or without waste removed; clear labels can be used |
| Liner Thickness | 50,8 µm - 254 µm (smoothness will affect feeding - a liner that is too slippery or too thin will slip through the drive rollers) |
| Label + Adhesive Thickness | 127 µm - 381 µm |
| Wind Direction | Wound out - see copy position chart below (position 3 or 4 for most containers) |
| What’s in the Box | AP360e Label Applicator, instructions, universal power supply |
| Warranty | 36 months (after product registration, for devices purchased in EU/EFTA countries and UK) |
| Manufacturer | Primera Technology, Inc. |
LABEL COPY POSITION CHART
Copy positions 1-4 labels wound out
Top of copy dispenses first.
Bottom of copy dispenses first.
Right side of copy dispenses first.
Left side of copy dispenses first.
Important Note: Pliability/Flexibility/Rigidity of the label is also a factor. If the label is too flexible, no matter the thickness, it can cause wrinkling or it may not pop off the liner when going around the peel edge. Polypropylene, Polyester and Vinyl labels tend to be more flexible than paper labels. If you suspect the label stock is too flexible, it is recommended that the stock and container be tested on the Applicator before making any purchase decisions of label stock or the applicator.