DTM Winder Series
Winders from DTM Print make it easy to un- and rewind large quantities of labels. Double your unwind capacity and no longer self-rewind the labels by hand.
They’re perfect for use with virtually any desktop label printer, no matter the printing technology. The DTM Label Winder Series includes the following models:
- DTM RW-4 Label Rewinder
- DTM RW-7 Label Rewinder
- DTM RW-8 Label Rewinder
The lateral guides of all DTM Label Winders guarantee an optimal parallel, tight and straight winding, which is essential for further processing, e.g. in a labelling unit. There's no need to work by hand anymore!
Load an up to 220 mm (8.66") wide roll and double your unwind capacity. Larger rolls typically have lower costs per label and save time as reloading circles decreases.
Tape the printed output onto a core of your choice, drop the dancer arm and start your job. Your labels will be rewound with perfect alignment and just the right amount of tension for either hand application or on a label applicator.
Each RW-4, RW-7 and RW-8 works as an unwinder, too!
What’s in the box ?
- Label winder
- 1.5", 2" and 3" core adaptors (RW-4/RW-7 only)
- Power supply
- Instructions
Key facts of RW-4/RW-7:
- With modular core adaptors the winders are your flexible companions for a time-saving workflow
- Coloured LED indicator provides operation status
- Gummed dancer arm attracts dust and keeps it off your label surface
- User adjustable winding speed of up to 355 mm/s (14"/s)
- Usable as rewinder and unwinder by easily switching from “Inside” to “Outside” mode
Load a roll with a width of up to 178 mm (7") to the RW-7 Label Rewinder or one with up to 120 mm (4.72") width to the RW-4 Label Rewinder. The arm can hold a roll weight of up to 5 kg and with the core adaptors you're super flexible. Easily change from 1" cores (without adaptor) to 1.5", 2" or 3" cores.
Key facts of RW-8:
- Supports up to 250 mm (10") OD with a roll weight of up to 8 kg
- Control panel allows the user to set a speed limit and winding directions
- User adjustable winding speed of up to 500 mm/s (19.6"/s)
- L-shaped support arm enables the use of heavy and wide rolls
- Usable as rewinder and unwinder by easily switching from "Face-In" to "Face-Out” mode
The RW-8 Label Rewinder from DTM Print is your perfect accessory for heavy duty jobs and complements the DTM Winder Series in the upper range for up to 220 mm (8.66") wide rolls. The RW-8 offers support for heavy rolls with its solid metal construction.
DTM UW-4 Passive Label Unwinder:
The UW-4 Passive Label Unwinder works powerless and stand-alone. It’s the perfect accessory if you want to increase your unwind capacity with up to 114.3 mm (4.5”) wide rolls.
Technical Specifications - Comparison Table
DTM Label Winders |
 |
 |
 |
 |
|---|---|---|---|---|
 |
 |
 |
|
|
| Winding Speeds: | Up to 355 mm/s (14”/s) | Up to 500 mm/s (19.6”/s) | - | |
| Maximum Roll Width: | 120 mm (4.72″) |
177.8 mm (7″) |
220 mm (8.66”) |
120 mm (4.75″) |
| Maximum Roll Diameter: | 203.2 mm (8″) | 152.4 mm (6″) | 250 mm (10”) | 254 mm (10″) |
| Maximum Roll Weight: | 5 kg | 8 kg | 5 kg | |
| Core Size: | Coreless, 25.4 mm (1″), 38.1 mm (1.5″), 50.8 mm (2″), 76.2 mm (3″) |
76.2 mm (3”) |
Works virtually with any roll core bigger than 25.4 mm (1″) | |
| Indicator Lights: | Power, Winding Mode, Alert | - | ||
| Controls: | Power, winding direction switch (Label Inside/Label Outside), speed adjustment wheel | Power, winding direction buttons (Face-In/Face-Out), speed adjustment buttons | - | |
| Power Requirements: | 1100-240 V AC (50/60 Hz), 24 V DC, 2 A | 100-240 V AC (50/60 Hz), 24 V DC, 2.5 A | Non-electric | |
| Power Consumption: | Idle: 3.95 W Average: 13.3 W |
Idle: 3.8 W Average: 12 W |
Idle: 1.5 W Average: 3.45 W |
- |
| Certifications: | CE, RoHS, TÜV, FCC Class A | CE, RoHS, FCC Class B, UKCA | - | |
| Weight: | 5 kg | 9 kg | 0.5 kg | |
| Dimensions (WxHxD): | 180 x 303 x 349 mm | 180 x 303 x 394 mm | 600 x 450 x 360 mm | 136-193 x 194 x 252 mm |
| What's in the Box? | RW-4, core adaptors (1,5", 2", 3"), universal power supply, instructions | RW-7, core adaptors (1,5", 2", 3"), universal power supply, instructions | RW-8, power supply, instructions | UW-4, instructions |
| Warranty: | 36 months (after product registration, for devices purchased in EU/EFTA countries and UK) | |||
| Manufacturer: | DTM Print GmbH | |||
Important Note: Pliability/flexibility/rigidity of the label is an important factor for the smooth transport of the label rolls in the rewinder. If the label is too flexible, no matter the thickness, it can cause uneven winding, slipping or stopping of the rewinder. Polypropylene, polyester and vinyl labels tend to be more flexible than paper labels. If you suspect the label stock is too flexible, it is recommended that the stock is tested on the rewinder before making any purchase decisions of label stock or the rewinder. Genuine DTM Label Stock substrates do not slip or cause any damage.