Close × Productpage Specifications Brochure Label Products Registration

Specifications AP550e Label Applicator

Container Platform 305 x 310 mm * (12” W x 12.2” D)
Container Height .05 mm to 203 mm ** (.002" to 8")
Container Shape Flat, tapered
Label Width 19 mm to 101.6 mm (.75” to 4”)
Label Height 19 mm to 152.4 mm (.75” to 6”)
Label Liner Width 22.2 mm to 104.8 mm (.875” to 4.125”)
Label Placement Leading edge up to 203 mm (8”) from trailing container edge
Label Roll Diameter 203 mm (8”) (maximum)
Label Roll Core 50.8 mm to 76.2 mm (2” to 3”) ID
Sensor Type Optical Sensor
Electrical Rating 12 VDC, 5.0 A
Power Requirements 100-240 VAC, 50/60 Hz, 60 watts
Agency Certifications UL, UL-C, CE, FCC Class A
Weight 10.9 kg (24 lbs)
Dimensions 305 x 541 x 256–391 mm (12” W x 21.3” D x 10.1”–15.4” H)
Gap between Labels: Recommended: 3.175mm - 6.3500mm (1/8" - 1/4")
Label Type: Die cut with waste removed. Black mark or gap for label sensor. Clear labels must have black mark on liner.
Liner Thickness: 2 mil - 10mil (smoothness will affect feeding - a liner that is too slippery or too thin will slip through the drive rollers)
Label + Adhesive Thickness: 5 mil - 15 mil***
Wind Direction: Wound out - See Copy-Position Chart below (Position 3 or 4 for most containers)
Manufacturer: Primera Technology, Inc.
Applicator position chart

* Container may overhang platform to the front and/or either side.
** Containers shorter than .8” (20.3 mm) may require adaptive spacers.
***Important Note: Pliability/Flexibility/Rigidity of the label is also a factor. If the label is too flexible, no matter the thickness, it can cause wrinkling or it may not pop off the liner when going around the peel edge. Polypropylene, Polyester and Vinyl labels tend to be more flexible than paper labels. If you suspect the label stock is too flexible, it is recommended that the stock and container be tested on the Applicator before making any purchase decisions of label stock or the applicator.

Copyright © 2019 DTM Print GmbH