Close × Productpage Specifications Brochure Movie Label Products Registration

Specifications AP360e/AP362e Label Applicator

Container Width: 25.4mm to 238mm (1" to 9.4")
Container Diameter: 15mm to 170mm (0.6" to 6.7")
Container Shape: Cylindrical and many tapered
Supply roll diameter: Up to 203mm (8" )
Media liner width: 25.4mm to 213mm (1" to 8.375")
Supply roll core: 50.8mm to 76.2mm (2" to 3" I.D.)
Electrical rating: 12VDC, 5.0A
Power requirements: 100-240VAC, 50/60 Hz, 60 watts
Agency certifications: UL, UL-C, CE, FCC Class A
Weight: 7.26 kg (16 lbs.)
Dimensions: 340mmW x 226mmH x 328mmD (13.4"W x 8.9"H x 12.9"D)
Gap between Labels: Recommended: 3.175mm - 6.3500mm (1/8" - 1/4")
Label Type: Die cut with waste removed. Clear labels can be used
Liner Thickness: 2 mil - 10mil (smoothness will affect feeding - a liner that is too slippery or too thin will slip through the drive rollers)
Label + Adhesive Thickness: 5 mil - 15 mil*
Wind Direction: Wound out - See Copy-Position Chart below (Position 3 or 4 for most containers)
Manufacturer: Primera Technology, Inc.
Applicator position chart

*Important Note: Pliability/Flexibility/Rigidity of the label is also a factor. If the label is too flexible, no matter the thickness, it can cause wrinkling or it may not pop off the liner when going around the peel edge. Polypropylene, Polyester and Vinyl labels tend to be more flexible than paper labels. If you suspect the label stock is too flexible, it is recommended that the stock and container be tested on the Applicator before making any purchase decisions of label stock or the applicator.

Copyright © 2019 DTM Print GmbH